Revival Off-Road
Rig Renew - Rubber, Vinyl & Leather Protection
Rig Renew - Rubber, Vinyl & Leather Protection
Couldn't load pickup availability
The finishing touch your rig deserves.
Don't let faded trims, rubber and plastics let the rest of your rig down.
Rig Renew rejuvenates and protects suitable rubber, vinyl, leather and select plastics, restoring a rich, natural finish without the greasy silicone shine.
Whether it's your mud flaps, mirrors, snorkel, interior trims or leather seats, Rig Renew helps protect the surfaces that cop the harsh Aussie sun every day.
PERFECT FOR:
• Rubber trims & seals
• Mud flaps
• Snorkels
• Mirrors
• Vinyl trims
• Leather seats
• Interior trims
• Select exterior plastics
Australian-made. Water-based. Silicone-free. Non-DG.
Protect the investment that fuels your lifestyle.
REJUVENATE. PROTECT. MAINTAIN.
Rig Renew is designed to rejuvenate and protect suitable rubber, vinyl, leather and select plastics while maintaining a natural-looking finish.
Unlike greasy silicone dressings that sit on the surface, Rig Renew helps restore depth and appearance while providing ongoing UV protection.
DESIGNED FOR SUITABLE:
• Rubber
• Vinyl
• Leather
• Select plastics
Perfect for both interior and exterior surfaces across 4WDs, caravans and trailers.
NATURAL FINISH
Rig Renew enhances the existing surface without leaving behind an overly glossy or oily appearance.
LONG-LASTING PROTECTION
Provides protection for up to 6 months, depending on surface condition, preparation, exposure and maintenance.
MAINTAIN WITH RIG WASH
Regular washing with pH-neutral Rig Wash helps remove dirt and contaminants without compromising the finish.
CHECK YOUR SURFACE FIRST
Rig Renew is designed for suitable rubber, vinyl, leather and select plastics.
But here's the important part: not all plastics are created equal.
THINK OF PLASTIC LIKE A SPAGHETTI CONTAINER
You know that plastic container you put leftover spaghetti bolognese in?
Sometimes it washes perfectly clean.
Other times, the tomato sauce seems to become part of the container forever!
You can have two containers that both look like “plastic”, but they're made from different types of plastic with different properties and they can react very differently to exactly the same thing.
Your rig is no different.
Mirrors, flares, trims, handles and other plastic components may all look similar, but they can be made from different plastic formulations, have different textures, coatings or finishes, and respond differently to a product.
That's why we say select plastics and why testing first is so important.
✓ READY TO RENEW
Generally suitable for:
• Rubber trims & seals
• Vinyl
• Leather
• Compatible plastic trims
• Plastic mirrors & surrounds
• Plastic flares
• Mud flaps
• Interior trims
⚠ PLASTICS - ALWAYS TEST FIRST
Before applying Rig Renew to any plastic:
• Test a small, inconspicuous area
• Allow it to completely dry
• Check the appearance and compatibility
• Only proceed if you're satisfied with the result
Previous dressings, silicones, cleaners, coatings and the age or condition of the plastic can also affect the final result.
ALWAYS TEST BEFORE FULL APPLICATION
Even if you've successfully used Rig Renew on one plastic component, don't assume another plastic will respond the same way.
Different component = different test patch.
NOT SURE?
Stop and ask before you apply.
Send us a clear photo of the surface and we'll help determine whether Rig Renew may be suitable.
TEST FIRST. FULL APPLICATION SECOND.
SURFACE PREPARATION IS KEY
Thoroughly clean the surface with pH-neutral Rig Wash to remove dirt, grease, dust and contaminants.
If the surface needs to be cleaned more than once - clean it again.
Allow the surface to completely dry before applying Rig Renew.
CHECK THE CONDITIONS
Before applying, make sure the surface is:
• Clean
• Completely dry
• Cool to touch
• Out of direct sunlight
Do not apply if rain is imminent or the surface is likely to get wet during the drying period.
TEST FIRST
Always test Rig Renew on a small, inconspicuous area first - especially on plastics or unfamiliar surfaces.
Allow the test area to fully dry before continuing.
APPLY LIGHTLY & EVENLY
Apply a small amount of Rig Renew to a clean Rig Wipe or suitable applicator.
Work evenly across the surface using light, consistent pressure.
Less is more.
Avoid over-applying or allowing excess product to pool on the surface.
ALLOW IT TO DRY
Allow Rig Renew to naturally dry before using or exposing the surface to moisture.
Drying time will vary depending on temperature and humidity.
CLEAN YOUR TRIGGER NOZZLE AFTER USE
Always rinse the trigger spray nozzle thoroughly with clean water after use.
Product left inside the trigger can harden and block the nozzle between applications.
REMEMBER
CLEAN FIRST. TEST FIRST. LESS IS MORE. LET IT DRY.
SURFACE PREPARATION IS KEY
Poor preparation can affect how Rig Renew applies and dries.
If the surface isn't clean, clean it again before applying.
THE FINISH LOOKS PATCHY
Patchiness can be caused by:
• Uneven preparation.
• Previous dressings or silicone products.
• Uneven application.
• Different materials reacting differently.
Allow the product to fully dry before assessing the finish.
IT LOOKS GREASY
Too much product has been applied.
Rig Renew is designed to be applied in light, even coats.
IT LOOKS STREAKY
This can be caused by:
• Too much product.
• Uneven pressure.
• Applying over dirt or contamination.
• Going back over product before it has dried.
Allow the surface to dry before applying additional product.
IT DOESN'T LOOK THE SAME EVERYWHERE
Different plastics, rubber and vinyl age differently.
UV exposure and previous treatments can cause surfaces to absorb product differently.
Always test first.
NOT SURE WHAT HAPPENED?
Stop application and send us clear photos before applying more product.
WHAT DOES RIG RENEW DO?
Rejuvenates and protects suitable rubber, vinyl, leather and select plastics while helping protect against UV fading and weathering.
WHAT'S THE DIFFERENCE BETWEEN RIG RENEW & RIG REVIVE?
Rig Renew is for rubber, vinyl, leather and select plastics.
Rig Revive is for powder-coated surfaces.
CAN I USE RIG RENEW ON ALL PLASTICS?
No. Not all plastics are created equal.
Think of the plastic container you put leftover spaghetti bolognese in. Sometimes it washes perfectly clean. Other times, that tomato sauce seems to become part of the container forever!
Both containers are “plastic”, but different plastics can have different properties and react differently to exactly the same thing.
Your rig is no different.
Mirrors, flares, trims and other components may all look like plastic, but they can be made from different formulations or have different coatings and finishes.
That's why we say select plastics — and why you should always test a small, inconspicuous area first.
Even if Rig Renew works perfectly on one plastic component, don't assume another will respond the same way.
DO I NEED TO TEST FIRST?
Yes. Always. Test a small, inconspicuous area and allow it to completely dry before full application.
CAN I USE IT INSIDE MY VEHICLE?
Yes, on suitable vinyl, leather and compatible plastic interior surfaces. Always test first.
CAN I USE IT ON TYRES?
No. Rig Renew is not designed as a tyre dressing.
CAN I APPLY IT IN DIRECT SUNLIGHT?
No. Apply to a clean, dry and cool surface out of direct sunlight.
HOW IMPORTANT IS SURFACE PREP?
Very. Dirt, grease, old dressings and previous treatments can affect the final result.
If it needs cleaning twice - clean it twice.
HOW MUCH SHOULD I USE?
Less is more. Apply a light, even coat rather than oversaturating the surface.
WHY DOES MY FINISH LOOK PATCHY OR UNEVEN?
Poor prep, previous dressings, too much product, uneven application or differences in the underlying material can all affect the result.
Allow it to fully dry before assessing the finish.
CAN I APPLY A SECOND COAT?
Yes. Allow the first coat to fully dry before applying another light coat if required.
HOW LONG DOES RIG RENEW LAST?
Up to 6 months, depending on the surface, preparation, application, exposure and maintenance.
HOW OFTEN SHOULD I REAPPLY IT?
Reapply when the surface begins to lose its protection or appearance. High UV and harsh outdoor exposure may require more frequent applications.
NOT SURE IF YOUR SURFACE IS SUITABLE?
Stop and ask before you apply. Send us a clear photo and we'll help point you in the right direction.
REJUVENATE. PROTECT. MAINTAIN.
Rig Renew is designed to rejuvenate and protect suitable rubber, vinyl, leather and select plastics while maintaining a natural-looking finish.
Unlike greasy silicone dressings that sit on the surface, Rig Renew helps restore depth and appearance while providing ongoing UV protection.
DESIGNED FOR SUITABLE:
• Rubber
• Vinyl
• Leather
• Select plastics
Perfect for both interior and exterior surfaces across 4WDs, caravans and trailers.
NATURAL FINISH
Rig Renew enhances the existing surface without leaving behind an overly glossy or oily appearance.
LONG-LASTING PROTECTION
Provides protection for up to 6 months, depending on surface condition, preparation, exposure and maintenance.
MAINTAIN WITH RIG WASH
Regular washing with pH-neutral Rig Wash helps remove dirt and contaminants without compromising the finish.
CHECK YOUR SURFACE FIRST
Rig Renew is designed for suitable rubber, vinyl, leather and select plastics.
But here's the important part: not all plastics are created equal.
THINK OF PLASTIC LIKE A SPAGHETTI CONTAINER
You know that plastic container you put leftover spaghetti bolognese in?
Sometimes it washes perfectly clean.
Other times, the tomato sauce seems to become part of the container forever!
You can have two containers that both look like “plastic”, but they're made from different types of plastic with different properties and they can react very differently to exactly the same thing.
Your rig is no different.
Mirrors, flares, trims, handles and other plastic components may all look similar, but they can be made from different plastic formulations, have different textures, coatings or finishes, and respond differently to a product.
That's why we say select plastics and why testing first is so important.
✓ READY TO RENEW
Generally suitable for:
• Rubber trims & seals
• Vinyl
• Leather
• Compatible plastic trims
• Plastic mirrors & surrounds
• Plastic flares
• Mud flaps
• Interior trims
⚠ PLASTICS - ALWAYS TEST FIRST
Before applying Rig Renew to any plastic:
• Test a small, inconspicuous area
• Allow it to completely dry
• Check the appearance and compatibility
• Only proceed if you're satisfied with the result
Previous dressings, silicones, cleaners, coatings and the age or condition of the plastic can also affect the final result.
ALWAYS TEST BEFORE FULL APPLICATION
Even if you've successfully used Rig Renew on one plastic component, don't assume another plastic will respond the same way.
Different component = different test patch.
NOT SURE?
Stop and ask before you apply.
Send us a clear photo of the surface and we'll help determine whether Rig Renew may be suitable.
TEST FIRST. FULL APPLICATION SECOND.
SURFACE PREPARATION IS KEY
Thoroughly clean the surface with pH-neutral Rig Wash to remove dirt, grease, dust and contaminants.
If the surface needs to be cleaned more than once - clean it again.
Allow the surface to completely dry before applying Rig Renew.
CHECK THE CONDITIONS
Before applying, make sure the surface is:
• Clean
• Completely dry
• Cool to touch
• Out of direct sunlight
Do not apply if rain is imminent or the surface is likely to get wet during the drying period.
TEST FIRST
Always test Rig Renew on a small, inconspicuous area first - especially on plastics or unfamiliar surfaces.
Allow the test area to fully dry before continuing.
APPLY LIGHTLY & EVENLY
Apply a small amount of Rig Renew to a clean Rig Wipe or suitable applicator.
Work evenly across the surface using light, consistent pressure.
Less is more.
Avoid over-applying or allowing excess product to pool on the surface.
ALLOW IT TO DRY
Allow Rig Renew to naturally dry before using or exposing the surface to moisture.
Drying time will vary depending on temperature and humidity.
CLEAN YOUR TRIGGER NOZZLE AFTER USE
Always rinse the trigger spray nozzle thoroughly with clean water after use.
Product left inside the trigger can harden and block the nozzle between applications.
REMEMBER
CLEAN FIRST. TEST FIRST. LESS IS MORE. LET IT DRY.
SURFACE PREPARATION IS KEY
Poor preparation can affect how Rig Renew applies and dries.
If the surface isn't clean, clean it again before applying.
THE FINISH LOOKS PATCHY
Patchiness can be caused by:
• Uneven preparation.
• Previous dressings or silicone products.
• Uneven application.
• Different materials reacting differently.
Allow the product to fully dry before assessing the finish.
IT LOOKS GREASY
Too much product has been applied.
Rig Renew is designed to be applied in light, even coats.
IT LOOKS STREAKY
This can be caused by:
• Too much product.
• Uneven pressure.
• Applying over dirt or contamination.
• Going back over product before it has dried.
Allow the surface to dry before applying additional product.
IT DOESN'T LOOK THE SAME EVERYWHERE
Different plastics, rubber and vinyl age differently.
UV exposure and previous treatments can cause surfaces to absorb product differently.
Always test first.
NOT SURE WHAT HAPPENED?
Stop application and send us clear photos before applying more product.
WHAT DOES RIG RENEW DO?
Rejuvenates and protects suitable rubber, vinyl, leather and select plastics while helping protect against UV fading and weathering.
WHAT'S THE DIFFERENCE BETWEEN RIG RENEW & RIG REVIVE?
Rig Renew is for rubber, vinyl, leather and select plastics.
Rig Revive is for powder-coated surfaces.
CAN I USE RIG RENEW ON ALL PLASTICS?
No. Not all plastics are created equal.
Think of the plastic container you put leftover spaghetti bolognese in. Sometimes it washes perfectly clean. Other times, that tomato sauce seems to become part of the container forever!
Both containers are “plastic”, but different plastics can have different properties and react differently to exactly the same thing.
Your rig is no different.
Mirrors, flares, trims and other components may all look like plastic, but they can be made from different formulations or have different coatings and finishes.
That's why we say select plastics — and why you should always test a small, inconspicuous area first.
Even if Rig Renew works perfectly on one plastic component, don't assume another will respond the same way.
DO I NEED TO TEST FIRST?
Yes. Always. Test a small, inconspicuous area and allow it to completely dry before full application.
CAN I USE IT INSIDE MY VEHICLE?
Yes, on suitable vinyl, leather and compatible plastic interior surfaces. Always test first.
CAN I USE IT ON TYRES?
No. Rig Renew is not designed as a tyre dressing.
CAN I APPLY IT IN DIRECT SUNLIGHT?
No. Apply to a clean, dry and cool surface out of direct sunlight.
HOW IMPORTANT IS SURFACE PREP?
Very. Dirt, grease, old dressings and previous treatments can affect the final result.
If it needs cleaning twice - clean it twice.
HOW MUCH SHOULD I USE?
Less is more. Apply a light, even coat rather than oversaturating the surface.
WHY DOES MY FINISH LOOK PATCHY OR UNEVEN?
Poor prep, previous dressings, too much product, uneven application or differences in the underlying material can all affect the result.
Allow it to fully dry before assessing the finish.
CAN I APPLY A SECOND COAT?
Yes. Allow the first coat to fully dry before applying another light coat if required.
HOW LONG DOES RIG RENEW LAST?
Up to 6 months, depending on the surface, preparation, application, exposure and maintenance.
HOW OFTEN SHOULD I REAPPLY IT?
Reapply when the surface begins to lose its protection or appearance. High UV and harsh outdoor exposure may require more frequent applications.
NOT SURE IF YOUR SURFACE IS SUITABLE?
Stop and ask before you apply. Send us a clear photo and we'll help point you in the right direction.