Revival Off-Road
Rig Revive - Powder Coat Protection & Rejuvenation
Rig Revive - Powder Coat Protection & Rejuvenation
Couldn't load pickup availability
Bring your rig back to life with Rig Revive. An Australian-made powdercoat rejuvenator and protectant designed for faded, dull and weathered surfaces.
Our water-based, silicone-free formula enhances depth and colour while providing ongoing protection against UV exposure, dirt and the elements  without the greasy, short-term shine of silicone-based products.
Got a brand-new rig? Rig Revive can also be used to help protect new powdercoat and keep it looking its best.
PERFECT FOR:
• Bullbars, scrub rails & rear bars
• Towbars, chassis frames & drawbars
• Checker plate caravans & trailers
• Rooftop tents
• Powder-coated 4WD accessories
• Galvanised drawbars & trailers
Non-DG. Water-based. Silicone-free. Australian-made. Tested & proven since 2016.Â
Protect the investment that fuels your lifestyle.
Bring your rig back to life with Rig Revive - the ONLY rejuvenator for tired, sun-faded powder-coated surfaces. Built for the toughest Aussie conditions, this non-DG, water-based and silicone free formula revives depth, colour, and protection in two effortless applications.
Proudly formulated and tested in Australia since 2016, Rig Revive enhances and rejuvenates weathered surfaces, creating a rich finish that resists dust, dirt, and UV damage. Tough enough for work rigs, show rigs, and everything in between - without the greasy residue or short-term shine of silicone-based products.
IS YOUR POWDERCOAT READY FOR A REVIVAL?
Rig Revive is designed to rejuvenate and protect faded, dull and weathered powdercoat, but the integrity of the existing coating matters.
Before purchasing, take a close look at your surface. Is the powdercoat simply showing signs of age and UV exposure, or has the coating itself started to physically fail?
âś“ READY TO REVIVE
Your powdercoat may be suitable for Rig Revive if it is:
• Faded or sun damaged
• Dull or lacking colour
• Chalky or weathered
• Unevenly faded from UV exposure
• Still intact and firmly bonded to the surface
Rig Revive rejuvenates the appearance of the existing powdercoat and provides ongoing protection.
âš TEST FIRST
If your powdercoat is heavily weathered, extremely chalky, unevenly deteriorated, or you're unsure what products have previously been applied, always complete a small test patch first.
Age, condition, previous treatments and the level of weathering can all influence the final result.
âś• REPAIR OR REFINISH
Rig Revive is a rejuvenation and protection product. It cannot repair powdercoat that has physically failed.
Rig Revive may not be suitable for powdercoat that is:
• Peeling or flaking
• Lifting or blistering
• Heavily corroded
• Chipped or physically damaged
• No longer properly bonded to the underlying surface
These surfaces may require repair, refinishing or replacement.
ALWAYS TEST BEFORE FULL APPLICATION
Apply Rig Revive to a small, inconspicuous area and allow it to fully dry before proceeding with the entire surface.
Every surface has a history. Age, UV exposure, environmental conditions and previously applied cleaners, waxes, silicones, dressings or coatings may affect the final result.
NOT SURE?
Send us a few clear photos of your surface before purchasing and we'll help you determine whether Rig Revive may be suitable.
Faded doesn't always mean finished. It might just be ready for a Revival.
SURFACE PREPARATION IS KEY
The final result starts with the prep.
Thoroughly wash the surface with pH-neutral Rig Wash to remove dirt, grease, salt, road grime and contaminants.
If the surface needs to be washed more than once -Â wash it again.
Rinse thoroughly and allow the surface to completely dry before applying Rig Revive.
Poor surface preparation can lead to poor application results, including streaking, patchiness or an uneven finish.
CHECK THE CONDITIONS
Before applying, make sure the surface is:
• Clean
• Completely dry
• Cool to touch
• Out of direct sunlight
Do not apply Rig Revive when the outside air temperature is below 10°C.
If temperatures are between 10–15°C, we recommend waiting for a warmer day where possible - ideally around 20°C.
Remember, the surface itself can be a different temperature to the surrounding air.
Temperature, humidity and weather conditions will directly affect drying and curing times.
Do not apply if rain is imminent.
TEST FIRST
Always test Rig Revive on a small, inconspicuous area and allow it to fully dry before continuing.
Only proceed with full application once you're satisfied with the test area.
APPLY LIGHTLY & EVENLY
Apply a small amount of Rig Revive to a lint-free Rig Wipe or suitable applicator.
Work in manageable sections using a light, even coat in one direction.
For large, flat surfaces, use an applicator pad rather than concentrated finger pressure through a wipe to help maintain even pressure.
Less is more.
Avoid excess product or allowing product to build up and run down the surface.
DON'T OVERWORK IT
Once Rig Revive begins to dry, leave it alone.
Do not rub, buff or repeatedly go back over the area. Overworking the product can contribute to streaking, patchiness and an uneven finish.
If you've missed an area, allow the coat to fully dry before correcting it.
ALLOW IT TO DRY
Drying time is weather dependent and will vary with temperature, humidity and surrounding conditions.
As a general guide, allow approximately 1 hour or more between coats in suitable conditions.
In cooler conditions below 15°C, allow approximately 2 hours or longer between coats.
Always judge the surface - not just the clock.
If the first coat still feels tacky, it is not dry. DO NOT apply the second coat.
Wait until the first coat is completely dry before continuing.
ALLOW IT TO CURE
Rig Revive continues to harden after application.
Depending on environmental conditions, it will generally take around 1–2 days to fully cure and develop hardness. In cooler conditions it can take 7 days to fully cure.
Avoid unnecessary exposure to chemicals while the coating is curing.
REMEMBER
PREP PROPERLY. CHECK THE WEATHER. LIGHT COATS. LET IT DRY. DON'T OVERWORK IT.
BEFORE BLAMING THE APPLICATION - CHECK THE PREP
Surface preparation is critical.
Dirt, grease, salt, previous products or other contaminants left on the surface can affect how Rig Revive applies, dries and bonds.
If the surface isn't properly clean, wash it again before applying.
Poor preparation can contribute to streaking, patchiness and an uneven finish.
STREAKY OR UNEVEN?
Common causes include:
• Too much product
• Uneven application pressure
• Overworking the product
• Applying to a warm or hot surface
• Direct sunlight
• Cold or unsuitable weather conditions
• Poor surface preparation
• Previous waxes, silicones, dressings or coatings
• Uneven deterioration or porosity of the original powdercoat
For large, flat surfaces, use an applicator pad to help maintain consistent pressure.
Do not immediately apply more product. Allow the surface to fully dry before assessing the finish.
RUNS OR DRIPS DOWN THE SURFACE?
This generally indicates too much product has been applied.
Rig Revive should be applied in light, even coats.
Avoid saturating the applicator or allowing excess product to collect and run down vertical surfaces.
PATCHY FINISH?
Patchiness can be caused by:
• Incomplete surface preparation
• Uneven product application
• Too much or too little product in different areas
• Going back over partially dried product
• Temperature differences across the surface
• Previous treatments or contamination
• Variations in the condition of the existing powdercoat
Allow the surface to completely dry before deciding whether further action is required.
STILL TACKY?
It isn't dry yet.
Do not apply another coat over tacky Rig Revive.
Drying times vary depending on temperature, humidity and weather conditions. Cooler conditions will generally require longer drying times.
Below 15°C, allow at least 1–2 hours or longer between coats and only proceed once the first coat is completely dry.
Do not apply Rig Revive below 10°C.
POWDERCOAT LOOKS DAMAGED?
Rig Revive cannot repair failed powdercoat.
Peeling, flaking, blistering, lifting, corrosion or loss of adhesion indicates deterioration of the existing coating.
Rejuvenating aged or weathered powdercoat may also make pre-existing imperfections or variations more noticeable.
NEED TO CORRECT AN APPLICATION?
Stop before adding more product.
Do not immediately apply additional coats or use solvents or chemicals without first determining what has caused the issue.
Contact Revival Off-Road with clear photos and details of:
• Surface condition
• How the surface was prepared
• Products previously used
• Applicator used
• Approximate temperature/weather conditions
• Number of coats applied
• Drying time between coats
We can then help determine the best next step.
WHEN IN DOUBT - STOP.
Don't keep adding product to try to fix an application issue. Allow the surface to dry and contact us before continuing.
WHAT DOES RIG REVIVE DO?
Rejuvenates and protects faded, dull and weathered powdercoat. It does not repair damaged or failed powdercoat.
IS MY POWDERCOAT SUITABLE?
If it’s faded but still intact - generally, yes.
If it’s peeling, flaking, blistering, lifting or corroded - NO.
DO I NEED TO TEST IT FIRST?
Yes. Always. Test a small, inconspicuous area and allow it to fully dry before continuing.
WHY IS MY FINISH STREAKY?
Too much product, uneven pressure, overworking, a hot surface or poor surface condition can cause an uneven finish. See Troubleshooting before applying more product.
CAN I APPLY IT IN THE SUN?
No. Apply to a clean, dry and cool surface out of direct sunlight.
HOW MUCH DO I USE?
Less is more. Apply light, even coats. Do not saturate the surface.
WHAT SHOULD I APPLY IT WITH?
Use a lint-free Rig Wipe for smaller areas. For large, flat surfaces, use an applicator pad for even pressure.
CAN I GO BACK OVER AN AREA?
Not while it’s drying. Don’t rub, buff or overwork it. Allow it to dry before applying another coat.
HOW LONG BETWEEN COATS?
Allow approximately 1 hour between coats, depending on temperature, humidity and surrounding conditions. The first coat must be dry before applying the next.
HOW MANY COATS?
We recommend two light, even coats.
CAN IT FIX PEELING OR DAMAGED POWDERCOAT?
No. Rig Revive rejuvenates the existing coating. It cannot repair coating failure, chips, peeling or corrosion.
HOW OFTEN SHOULD I CLEAN MY POWDERCOAT?
For general use, clean regularly with a pH-neutral detergent such as Rig Wash. For beach or coastal use, wash after every trip to remove salt, sand and contaminants.
Surfaces exposed to high UV, pollutants or harsh outdoor conditions should be cleaned and checked more frequently.
HOW OFTEN SHOULD I REAPPLY RIG REVIVE?
Rig Revive provides protection for up to 12 months. Reapplication will depend on UV exposure, weather, use, washing frequency and the condition of the original powdercoat.
HOW LONG DOES RIG REVIVE LAST?
Up to 12 months, depending on surface condition, preparation, application, exposure and maintenance.
WHAT DO I WASH WITH BEFORE APPLYING?
AÂ pH-neutral detergent such as Rig Wash. The surface must be completely clean and dry.
MY POWDERCOAT IS REALLY OLD — WILL IT WORK?
Age isn’t the only factor — integrity matters. If you’re unsure, test first or send us photos before purchasing.
NOT SURE?
Stop and ask us before you apply it. It’s much easier to answer a question before you’ve coated the whole rig.
Bring your rig back to life with Rig Revive - the ONLY rejuvenator for tired, sun-faded powder-coated surfaces. Built for the toughest Aussie conditions, this non-DG, water-based and silicone free formula revives depth, colour, and protection in two effortless applications.
Proudly formulated and tested in Australia since 2016, Rig Revive enhances and rejuvenates weathered surfaces, creating a rich finish that resists dust, dirt, and UV damage. Tough enough for work rigs, show rigs, and everything in between - without the greasy residue or short-term shine of silicone-based products.
IS YOUR POWDERCOAT READY FOR A REVIVAL?
Rig Revive is designed to rejuvenate and protect faded, dull and weathered powdercoat, but the integrity of the existing coating matters.
Before purchasing, take a close look at your surface. Is the powdercoat simply showing signs of age and UV exposure, or has the coating itself started to physically fail?
âś“ READY TO REVIVE
Your powdercoat may be suitable for Rig Revive if it is:
• Faded or sun damaged
• Dull or lacking colour
• Chalky or weathered
• Unevenly faded from UV exposure
• Still intact and firmly bonded to the surface
Rig Revive rejuvenates the appearance of the existing powdercoat and provides ongoing protection.
âš TEST FIRST
If your powdercoat is heavily weathered, extremely chalky, unevenly deteriorated, or you're unsure what products have previously been applied, always complete a small test patch first.
Age, condition, previous treatments and the level of weathering can all influence the final result.
âś• REPAIR OR REFINISH
Rig Revive is a rejuvenation and protection product. It cannot repair powdercoat that has physically failed.
Rig Revive may not be suitable for powdercoat that is:
• Peeling or flaking
• Lifting or blistering
• Heavily corroded
• Chipped or physically damaged
• No longer properly bonded to the underlying surface
These surfaces may require repair, refinishing or replacement.
ALWAYS TEST BEFORE FULL APPLICATION
Apply Rig Revive to a small, inconspicuous area and allow it to fully dry before proceeding with the entire surface.
Every surface has a history. Age, UV exposure, environmental conditions and previously applied cleaners, waxes, silicones, dressings or coatings may affect the final result.
NOT SURE?
Send us a few clear photos of your surface before purchasing and we'll help you determine whether Rig Revive may be suitable.
Faded doesn't always mean finished. It might just be ready for a Revival.
SURFACE PREPARATION IS KEY
The final result starts with the prep.
Thoroughly wash the surface with pH-neutral Rig Wash to remove dirt, grease, salt, road grime and contaminants.
If the surface needs to be washed more than once -Â wash it again.
Rinse thoroughly and allow the surface to completely dry before applying Rig Revive.
Poor surface preparation can lead to poor application results, including streaking, patchiness or an uneven finish.
CHECK THE CONDITIONS
Before applying, make sure the surface is:
• Clean
• Completely dry
• Cool to touch
• Out of direct sunlight
Do not apply Rig Revive when the outside air temperature is below 10°C.
If temperatures are between 10–15°C, we recommend waiting for a warmer day where possible - ideally around 20°C.
Remember, the surface itself can be a different temperature to the surrounding air.
Temperature, humidity and weather conditions will directly affect drying and curing times.
Do not apply if rain is imminent.
TEST FIRST
Always test Rig Revive on a small, inconspicuous area and allow it to fully dry before continuing.
Only proceed with full application once you're satisfied with the test area.
APPLY LIGHTLY & EVENLY
Apply a small amount of Rig Revive to a lint-free Rig Wipe or suitable applicator.
Work in manageable sections using a light, even coat in one direction.
For large, flat surfaces, use an applicator pad rather than concentrated finger pressure through a wipe to help maintain even pressure.
Less is more.
Avoid excess product or allowing product to build up and run down the surface.
DON'T OVERWORK IT
Once Rig Revive begins to dry, leave it alone.
Do not rub, buff or repeatedly go back over the area. Overworking the product can contribute to streaking, patchiness and an uneven finish.
If you've missed an area, allow the coat to fully dry before correcting it.
ALLOW IT TO DRY
Drying time is weather dependent and will vary with temperature, humidity and surrounding conditions.
As a general guide, allow approximately 1 hour or more between coats in suitable conditions.
In cooler conditions below 15°C, allow approximately 2 hours or longer between coats.
Always judge the surface - not just the clock.
If the first coat still feels tacky, it is not dry. DO NOT apply the second coat.
Wait until the first coat is completely dry before continuing.
ALLOW IT TO CURE
Rig Revive continues to harden after application.
Depending on environmental conditions, it will generally take around 1–2 days to fully cure and develop hardness. In cooler conditions it can take 7 days to fully cure.
Avoid unnecessary exposure to chemicals while the coating is curing.
REMEMBER
PREP PROPERLY. CHECK THE WEATHER. LIGHT COATS. LET IT DRY. DON'T OVERWORK IT.
BEFORE BLAMING THE APPLICATION - CHECK THE PREP
Surface preparation is critical.
Dirt, grease, salt, previous products or other contaminants left on the surface can affect how Rig Revive applies, dries and bonds.
If the surface isn't properly clean, wash it again before applying.
Poor preparation can contribute to streaking, patchiness and an uneven finish.
STREAKY OR UNEVEN?
Common causes include:
• Too much product
• Uneven application pressure
• Overworking the product
• Applying to a warm or hot surface
• Direct sunlight
• Cold or unsuitable weather conditions
• Poor surface preparation
• Previous waxes, silicones, dressings or coatings
• Uneven deterioration or porosity of the original powdercoat
For large, flat surfaces, use an applicator pad to help maintain consistent pressure.
Do not immediately apply more product. Allow the surface to fully dry before assessing the finish.
RUNS OR DRIPS DOWN THE SURFACE?
This generally indicates too much product has been applied.
Rig Revive should be applied in light, even coats.
Avoid saturating the applicator or allowing excess product to collect and run down vertical surfaces.
PATCHY FINISH?
Patchiness can be caused by:
• Incomplete surface preparation
• Uneven product application
• Too much or too little product in different areas
• Going back over partially dried product
• Temperature differences across the surface
• Previous treatments or contamination
• Variations in the condition of the existing powdercoat
Allow the surface to completely dry before deciding whether further action is required.
STILL TACKY?
It isn't dry yet.
Do not apply another coat over tacky Rig Revive.
Drying times vary depending on temperature, humidity and weather conditions. Cooler conditions will generally require longer drying times.
Below 15°C, allow at least 1–2 hours or longer between coats and only proceed once the first coat is completely dry.
Do not apply Rig Revive below 10°C.
POWDERCOAT LOOKS DAMAGED?
Rig Revive cannot repair failed powdercoat.
Peeling, flaking, blistering, lifting, corrosion or loss of adhesion indicates deterioration of the existing coating.
Rejuvenating aged or weathered powdercoat may also make pre-existing imperfections or variations more noticeable.
NEED TO CORRECT AN APPLICATION?
Stop before adding more product.
Do not immediately apply additional coats or use solvents or chemicals without first determining what has caused the issue.
Contact Revival Off-Road with clear photos and details of:
• Surface condition
• How the surface was prepared
• Products previously used
• Applicator used
• Approximate temperature/weather conditions
• Number of coats applied
• Drying time between coats
We can then help determine the best next step.
WHEN IN DOUBT - STOP.
Don't keep adding product to try to fix an application issue. Allow the surface to dry and contact us before continuing.
WHAT DOES RIG REVIVE DO?
Rejuvenates and protects faded, dull and weathered powdercoat. It does not repair damaged or failed powdercoat.
IS MY POWDERCOAT SUITABLE?
If it’s faded but still intact - generally, yes.
If it’s peeling, flaking, blistering, lifting or corroded - NO.
DO I NEED TO TEST IT FIRST?
Yes. Always. Test a small, inconspicuous area and allow it to fully dry before continuing.
WHY IS MY FINISH STREAKY?
Too much product, uneven pressure, overworking, a hot surface or poor surface condition can cause an uneven finish. See Troubleshooting before applying more product.
CAN I APPLY IT IN THE SUN?
No. Apply to a clean, dry and cool surface out of direct sunlight.
HOW MUCH DO I USE?
Less is more. Apply light, even coats. Do not saturate the surface.
WHAT SHOULD I APPLY IT WITH?
Use a lint-free Rig Wipe for smaller areas. For large, flat surfaces, use an applicator pad for even pressure.
CAN I GO BACK OVER AN AREA?
Not while it’s drying. Don’t rub, buff or overwork it. Allow it to dry before applying another coat.
HOW LONG BETWEEN COATS?
Allow approximately 1 hour between coats, depending on temperature, humidity and surrounding conditions. The first coat must be dry before applying the next.
HOW MANY COATS?
We recommend two light, even coats.
CAN IT FIX PEELING OR DAMAGED POWDERCOAT?
No. Rig Revive rejuvenates the existing coating. It cannot repair coating failure, chips, peeling or corrosion.
HOW OFTEN SHOULD I CLEAN MY POWDERCOAT?
For general use, clean regularly with a pH-neutral detergent such as Rig Wash. For beach or coastal use, wash after every trip to remove salt, sand and contaminants.
Surfaces exposed to high UV, pollutants or harsh outdoor conditions should be cleaned and checked more frequently.
HOW OFTEN SHOULD I REAPPLY RIG REVIVE?
Rig Revive provides protection for up to 12 months. Reapplication will depend on UV exposure, weather, use, washing frequency and the condition of the original powdercoat.
HOW LONG DOES RIG REVIVE LAST?
Up to 12 months, depending on surface condition, preparation, application, exposure and maintenance.
WHAT DO I WASH WITH BEFORE APPLYING?
AÂ pH-neutral detergent such as Rig Wash. The surface must be completely clean and dry.
MY POWDERCOAT IS REALLY OLD — WILL IT WORK?
Age isn’t the only factor — integrity matters. If you’re unsure, test first or send us photos before purchasing.
NOT SURE?
Stop and ask us before you apply it. It’s much easier to answer a question before you’ve coated the whole rig.