Revival Off-Road
Rig Wipes - 50 pack!
Rig Wipes - 50 pack!
Couldn't load pickup availability
The right product deserves the right applicator.
Rig Wipes are our pro-grade, lint-free application wipes designed for smooth, controlled application of Rig Revive and Rig Renew.
Soft, durable and reusable, they help distribute product evenly without leaving behind lint or fibres.
Perfect for smaller surfaces, detailed areas, barwork, trims and those awkward spots your rig has plenty of.
RINSE. DRY. REUSE.
Simple gear. Better application.
PRO-GRADE LINT-FREE APPLICATION WIPES
Rig Wipes are designed to make applying your Revival products simple, controlled and mess-free.
Their lint-free construction helps prevent fibres being left behind while applying Rig Revive or Rig Renew.
PERFECT FOR:
• Bullbars & barwork
• Scrub rails
• Smaller powder-coated surfaces
• Rubber & vinyl trims
• Leather
• Compatible plastics
• Detailed & hard-to-reach areas
REUSABLE
Rig Wipes can be rinsed, dried and reused.
For best results, keep separate wipes for different Revival products to prevent cross-contamination.
WORKING ON A LARGE FLAT SURFACE?
For large, flat areas such as checker plate, caravan panels, canopies or large powder-coated surfaces, we recommend using an applicator pad rather than concentrated finger pressure through a wipe.
This helps maintain more consistent pressure and product distribution.
CHOOSE THE RIGHT APPLICATOR FOR THE JOB
Rig Wipes are ideal for smaller, detailed and irregular surfaces where controlled application is important.
BEST FOR:
• Barwork
• Rails
• Trims
• Smaller surfaces
• Detailed areas
• Hard-to-reach areas
LARGE FLAT SURFACES
For large, flat surfaces, we recommend using an applicator pad.
Using your fingers behind a wipe can create concentrated pressure points, which may contribute to uneven product distribution or streaking.
KEEP THEM SEPARATE
If you're using both Rig Revive and Rig Renew, use separate Rig Wipes for each product.
Do not cross-contaminate applicators between products.
APPLY YOUR PRODUCT
Apply a small amount of Rig Revive or Rig Renew to a clean Rig Wipe.
Less is more.
APPLY LIGHTLY & EVENLY
Use light, consistent pressure and follow the application instructions for the product you're using.
For Rig Revive, apply a light, even coat in one direction and avoid repeatedly going back over the product as it begins to dry.
KEEP PRODUCTS SEPARATE
Use a dedicated Rig Wipe for each product.
Do not use the same wipe for Rig Revive and Rig Renew.
AFTER USE
Thoroughly rinse your Rig Wipe with clean water immediately after use.
Allow it to completely dry before storing or reusing.
Do not allow product to harden in the wipe.
LARGE SURFACE?
Switch to an applicator pad for large, flat surfaces to help maintain consistent pressure and product distribution.
REMEMBER
LIGHT PRESSURE. LIGHT PRODUCT. RINSE. DRY. REUSE.
GETTING THE BEST FROM YOUR RIG WIPES
WIPE FEELS STIFF AFTER USE?
Product may have been left to dry in the fibres.
Rinse your Rig Wipe thoroughly with clean water immediately after use and allow it to completely dry before storing.
APPLICATION LOOKING STREAKY OR UNEVEN?
The wipe isn't always the culprit.
Check that you're:
• Using a clean Rig Wipe
• Applying a small amount of product — less is more
• Using light, consistent pressure
• Following the application instructions for your Revival product
• Working on a properly prepared surface
WORKING ON A LARGE FLAT SURFACE?
Switch to an applicator pad.
Finger pressure through a wipe can create concentrated pressure points across larger surfaces, making consistent application more difficult.
USED THE SAME WIPE FOR DIFFERENT PRODUCTS?
Grab a fresh one.
We recommend keeping separate Rig Wipes for Rig Revive and Rig Renew to avoid cross-contamination.
WIPE DIRTY OR CONTAMINATED?
Don't keep applying product with it.
Rinse thoroughly and allow it to dry, or switch to a clean Rig Wipe before continuing.
WHEN IN DOUBT - START CLEAN.
Clean surface. Clean wipe. Light product. Even application.
WHAT ARE RIG WIPES?
Pro-grade lint-free wipes designed for applying Rig Revive, Rig Renew and other suitable Revival products.
ARE THEY REUSABLE?
Yes. Rinse, dry and reuse.
HOW DO I CLEAN THEM?
Rinse thoroughly with clean water immediately after use and allow them to completely dry.
CAN I LET PRODUCT DRY IN THE WIPE?
No. Clean the wipe after use before the product has a chance to harden.
CAN I USE THE SAME WIPE FOR RIG REVIVE & RIG RENEW?
No. Keep separate wipes for each product to prevent cross-contamination.
ARE RIG WIPES GOOD FOR LARGE FLAT SURFACES?
For smaller and detailed areas - absolutely.
For large, flat surfaces, we recommend an applicator pad to help maintain consistent pressure and product distribution.
WILL THEY LEAVE LINT BEHIND?
They're designed to be lint-free, helping provide a cleaner application without loose fibres being left on the surface.
HOW MUCH PRODUCT SHOULD I PUT ON THE WIPE?
Start small. Less is more. You can always add a little more product if required.
HOW SHOULD I STORE THEM?
Make sure they're thoroughly rinsed and completely dry before storing for reuse.
PRO-GRADE LINT-FREE APPLICATION WIPES
Rig Wipes are designed to make applying your Revival products simple, controlled and mess-free.
Their lint-free construction helps prevent fibres being left behind while applying Rig Revive or Rig Renew.
PERFECT FOR:
• Bullbars & barwork
• Scrub rails
• Smaller powder-coated surfaces
• Rubber & vinyl trims
• Leather
• Compatible plastics
• Detailed & hard-to-reach areas
REUSABLE
Rig Wipes can be rinsed, dried and reused.
For best results, keep separate wipes for different Revival products to prevent cross-contamination.
WORKING ON A LARGE FLAT SURFACE?
For large, flat areas such as checker plate, caravan panels, canopies or large powder-coated surfaces, we recommend using an applicator pad rather than concentrated finger pressure through a wipe.
This helps maintain more consistent pressure and product distribution.
CHOOSE THE RIGHT APPLICATOR FOR THE JOB
Rig Wipes are ideal for smaller, detailed and irregular surfaces where controlled application is important.
BEST FOR:
• Barwork
• Rails
• Trims
• Smaller surfaces
• Detailed areas
• Hard-to-reach areas
LARGE FLAT SURFACES
For large, flat surfaces, we recommend using an applicator pad.
Using your fingers behind a wipe can create concentrated pressure points, which may contribute to uneven product distribution or streaking.
KEEP THEM SEPARATE
If you're using both Rig Revive and Rig Renew, use separate Rig Wipes for each product.
Do not cross-contaminate applicators between products.
APPLY YOUR PRODUCT
Apply a small amount of Rig Revive or Rig Renew to a clean Rig Wipe.
Less is more.
APPLY LIGHTLY & EVENLY
Use light, consistent pressure and follow the application instructions for the product you're using.
For Rig Revive, apply a light, even coat in one direction and avoid repeatedly going back over the product as it begins to dry.
KEEP PRODUCTS SEPARATE
Use a dedicated Rig Wipe for each product.
Do not use the same wipe for Rig Revive and Rig Renew.
AFTER USE
Thoroughly rinse your Rig Wipe with clean water immediately after use.
Allow it to completely dry before storing or reusing.
Do not allow product to harden in the wipe.
LARGE SURFACE?
Switch to an applicator pad for large, flat surfaces to help maintain consistent pressure and product distribution.
REMEMBER
LIGHT PRESSURE. LIGHT PRODUCT. RINSE. DRY. REUSE.
GETTING THE BEST FROM YOUR RIG WIPES
WIPE FEELS STIFF AFTER USE?
Product may have been left to dry in the fibres.
Rinse your Rig Wipe thoroughly with clean water immediately after use and allow it to completely dry before storing.
APPLICATION LOOKING STREAKY OR UNEVEN?
The wipe isn't always the culprit.
Check that you're:
• Using a clean Rig Wipe
• Applying a small amount of product — less is more
• Using light, consistent pressure
• Following the application instructions for your Revival product
• Working on a properly prepared surface
WORKING ON A LARGE FLAT SURFACE?
Switch to an applicator pad.
Finger pressure through a wipe can create concentrated pressure points across larger surfaces, making consistent application more difficult.
USED THE SAME WIPE FOR DIFFERENT PRODUCTS?
Grab a fresh one.
We recommend keeping separate Rig Wipes for Rig Revive and Rig Renew to avoid cross-contamination.
WIPE DIRTY OR CONTAMINATED?
Don't keep applying product with it.
Rinse thoroughly and allow it to dry, or switch to a clean Rig Wipe before continuing.
WHEN IN DOUBT - START CLEAN.
Clean surface. Clean wipe. Light product. Even application.
WHAT ARE RIG WIPES?
Pro-grade lint-free wipes designed for applying Rig Revive, Rig Renew and other suitable Revival products.
ARE THEY REUSABLE?
Yes. Rinse, dry and reuse.
HOW DO I CLEAN THEM?
Rinse thoroughly with clean water immediately after use and allow them to completely dry.
CAN I LET PRODUCT DRY IN THE WIPE?
No. Clean the wipe after use before the product has a chance to harden.
CAN I USE THE SAME WIPE FOR RIG REVIVE & RIG RENEW?
No. Keep separate wipes for each product to prevent cross-contamination.
ARE RIG WIPES GOOD FOR LARGE FLAT SURFACES?
For smaller and detailed areas - absolutely.
For large, flat surfaces, we recommend an applicator pad to help maintain consistent pressure and product distribution.
WILL THEY LEAVE LINT BEHIND?
They're designed to be lint-free, helping provide a cleaner application without loose fibres being left on the surface.
HOW MUCH PRODUCT SHOULD I PUT ON THE WIPE?
Start small. Less is more. You can always add a little more product if required.
HOW SHOULD I STORE THEM?
Make sure they're thoroughly rinsed and completely dry before storing for reuse.